0.6/1 kV
YJV 0.6/1 kV power cable
XLPE (cross-linked polyethylene) · Unarmoured (steel-tape variant → YJV22)
17 baris · IEC 60502-1 · GB/T 12706.1-2008
IEC 60502-1GB/T 12706.1-2008SNI IEC 60502-1:2009
Dokumentasi teknis
Matriks spek, IEC type-tests, desain layar MV.
Sembilan family kabel, 80+ baris data spek per conductor class, empat level tegangan MV (6/10 → 26/35 kV) dengan desain screen IEC 60502-2, dan delapan laporan type-test dari CESI / DNV KEMA / TÜV Rheinland. Drop baris langsung ke single-line diagram Anda.
Baris sampel · YJV22 MV
Seperti apa satu baris bid-grade.
| Ukuran | Kelas | OD | Berat | Udara 30°C | Terkubur | Rdc20 | Rac90 | X | Isc 1 s |
|---|---|---|---|---|---|---|---|---|---|
| YJV22 3×185 mm² (12/20 kV) | Class 2 stranded | Ø 74.8 mm ± 1.0 | 8,068 kg/km | 404 A | 380 A | 0.0991 Ω/km | 0.127 Ω/km | 0.108 Ω/km | 26.5 kA |
XLPE 5.5 mm + inner/outer semi-con 0.6 mm + 25 mm² copper-tape screen · PD ≤ 10 pC at 2 U₀ · GB/T 12706.4-2008 / IEC 60502-2. Bend radius 15 × OD = 1,122 mm. Buried at 0.7 m, soil ρ = 2.5 K·m/W. Methods E / D / B2 per IEC 60364-5-52.
Matriks spek · 9 keluarga
80+ baris · 4 tingkat tegangan · 8 faktor koreksi per keluarga.
0.6/1 kV (LV) · 6/10 kV (MV)
YJV22 0.6/1 kV & 6/10 kV steel-tape armoured
XLPE · Galvanized steel-tape (STA) double-layer overlap
19 baris · IEC 60502-1 · IEC 60502-2
IEC 60502-1IEC 60502-2GB/T 12706.1-2008
450/750 V
BV / BVR 450/750 V copper building wire
PVC TI1 · Not applicable
12 baris · IEC 60227-3 · GB/T 5023.3
IEC 60227-3GB/T 5023.3SNI 04-6629.3:2006
450/750 V
BVVB flat 450/750 V building cable
PVC TI1 cores · Not applicable
8 baris · IEC 60227-4 · GB/T 5023.4
IEC 60227-4GB/T 5023.4JB/T 8734.5-2016
300/500 V
RVV 300/500 V flexible cable
PVC TI2 cores · Not applicable
9 baris · IEC 60227-5 · GB/T 5023.5
IEC 60227-5GB/T 5023.5SNI 04-6629.5:2006
450/750 V
WDZA-GYJS(F)/125 °C LSZH safety wire
Double-layer irradiated cross-linked halogen-free low-smoke compound · Not applicable
7 baris · JG/T 441-2014 · IEC 60332-3
JG/T 441-2014IEC 60332-3IEC 61034-2
450/750 V
KVV / KVVR / KVVRP / KVV22 control cable
PVC or XLPE (per family) · Shield (KVVRP) · steel-tape (KVV22) · plain (KVV)
9 baris · GB/T 9330.1-2020 · GB/T 9330.2-2020
GB/T 9330.1-2020GB/T 9330.2-2020IEC 60227-7 signal
Data (PoE+ supported on Cat6 with bundling derating)
Cat5e / Cat6 industrial LAN cable
Polyethylene (PE) per pair · Optional foil/braid shield (F/UTP / SF/UTP)
3 baris · TIA/EIA-568-C.2 · ISO/IEC 11801
TIA/EIA-568-C.2ISO/IEC 11801YD/T 1019-2013
0.6/1 kV
YFD prefabricated branch cable
XLPE · Optional steel-tape; molded-joint factory pre-cast
4 baris · JB/T 10743-2007 · Project drawing schedule required
JB/T 10743-2007Project drawing schedule required
Laporan IEC type-test
CESI · DNV KEMA · TÜV Rheinland.
Lab + standard + scope per laporan di bawah ini bersifat tetap; nomor laporan, tanggal terbit, dan PDF bertanda tangan dirilis saat penerbitan di bawah NDA pada RFQ pertama yang memenuhi syarat. Link portal verifikasi di bawah membuka halaman pencarian publik lab untuk cross-check pembeli terhadap nomor yang diterbitkan.
Lingkup MV saat ini. Lingkup bid MV saat ini: 6/10 kV — type-test IEC 60502-2 sudah ada di berkas, konduktor Class 2 dan Class 5, matriks spek 12-bracket di bawah. Baris YJV22 12/20 kV dirujuk terhadap konstruksi standar IEC 60502-2 dan sedang dalam re-test terkoordinasi untuk konfirmasi per-voltage-class — <strong>target rilis type-test 12/20 kV: Q3 2026</strong>. Sementara itu berguna sebagai preview engineering; untuk prakualifikasi tender 12/20 kV final, mohon bersandar pada lingkup per-voltage-class yang sudah dikonfirmasi (linimasa rilis di /about).
IEC 60502-1 (2004) + A1 (2009)
Type tests on YJV 0.6/1 kV XLPE-insulated power cable: tensile strength, elongation, thermal aging, hot-set, water absorption, AC voltage 3.5 kV / 5 min, partial discharge, bending + tan δ, heating cycle.
- No. laporan
- Specimen — issued under NDA
- Lab
- CESI S.p.A. · Milan, Italy
IEC 60502-2 (2014)
Type tests on YJV22 6/10 kV three-core armoured cable: partial discharge ≤ 10 pC at 2 U₀, AC voltage 6.5 kV (U₀) for 5 min, impulse withstand 95 kV peak, screen system continuity, 8-hour heat cycle, water absorption.
- No. laporan
- Specimen — issued under NDA
- Lab
- CESI S.p.A. · Milan, Italy
IEC 60228 (2004)
Conductor resistance verification — Class 1 solid, Class 2 stranded, Class 5 flexible compliance for sections 1.5 → 240 mm². Resistance measured at 20 °C and corrected to 20 °C ambient.
- No. laporan
- Specimen — issued under NDA
- Lab
- CESI S.p.A. · Milan, Italy
IEC 60331-1-2 (2018)
Fire-resistance test at 750 °C for 180 minutes with mechanical impact at 5 min intervals. Circuit continuity verified across the full burn cycle on 4×2.5 mm² sample.
- No. laporan
- Specimen — issued under NDA
- Lab
- DNV KEMA Laboratories · Arnhem, Netherlands
IEC 60332-3-24 (Category C)
Flame propagation test on bunched cables (Category C — bundled 1.5 L/m of non-metallic material): no flame propagation beyond 2.5 m above burner after 20 minutes burner application.
- No. laporan
- Specimen — issued under NDA
- Lab
- DNV KEMA Laboratories · Arnhem, Netherlands
IEC 61034-2 (2019)
Smoke density on burning cable: minimum 60 % light transmittance under steady-state burn conditions, 3 m cube test chamber, measurement at 0.6 m height.
- No. laporan
- Specimen — issued under NDA
- Lab
- TÜV Rheinland · Köln, Germany
IEC 60754-1 (2019)
Determination of halogen acid gas (HCl + HBr) content of materials taken from the cable insulation and sheath: result < 5 mg/g (LSZH compound compliance).
- No. laporan
- Specimen — issued under NDA
- Lab
- TÜV Rheinland · Köln, Germany
IEC 60754-2 (2019)
Determination of degree of acidity (pH) and conductivity of combustion gases from cable materials: pH ≥ 4.3 and conductivity ≤ 10 μS/mm.
- No. laporan
- Specimen — issued under NDA
- Lab
- TÜV Rheinland · Köln, Germany
IEC 60502-2 (2014)
Type tests on YJV22 12/20 kV three-core armoured cable: partial discharge ≤ 10 pC at 2 U₀, AC voltage 21 kV (U₀) for 5 min, impulse withstand 125 kV peak, screen system continuity, 8-hour heat cycle, water absorption. Pending coordinated re-test against the 6/10 kV specimen entry.
- No. laporan
- Pending issuance — coordinated re-test required for 12/20 kV scope
- Lab
- CESI S.p.A. (target) · Milan, Italy
Sikap kepercayaan
Klaim teknis tetap datasheet-gated.
Stack konstruksi
Outer sheath, isolasi, konduktor, armor — semua lapisan visible untuk pembeli.
Paket pesanan
Gulungan, pull box 305 m, drum kabel, sealed end, dan panduan handling.
Risiko rute
Pemasangan underground/buried, terowongan, cable tray, control panel, riser — sesuai pemilihan family kabel.
Gerbang dokumen
Wording sertifikat, laporan uji, penerima pembayaran, cakupan model tetap terverifikasi sebelum pesanan.
Halaman berikutnya
Lihat syarat komersial, pembagian saluran, FOB grosir, kesiapan Indonesia.