0.6/1 kV
YJV 0.6/1 kV power cable
XLPE (cross-linked polyethylene) · Unarmoured (steel-tape variant → YJV22)
17 baris · IEC 60502-1 · GB/T 12706.1-2008
IEC 60502-1GB/T 12706.1-2008SNI IEC 60502-1:2009
Dokumentasi kejuruteraan
Matriks spek, IEC type-tests, reka bentuk skrin MV.
Sembilan keluarga kabel, lapan puluh+ baris data spek sedar-kelas-konduktor, empat tahap voltan MV (6/10 → 26/35 kV) dengan reka bentuk skrin IEC 60502-2, dan lapan laporan type-test daripada CESI / DNV KEMA / TÜV Rheinland. Jatuhkan baris ke dalam semakan rajah satu-baris anda.
Baris sampel · YJV22 MV
Bagaimana satu baris peringkat tender kelihatan.
| Saiz | Kelas | OD | Berat | Udara 30°C | Tertanam | Rdc20 | Rac90 | X | Isc 1 s |
|---|---|---|---|---|---|---|---|---|---|
| YJV22 3×185 mm² (12/20 kV) | Class 2 stranded | Ø 74.8 mm ± 1.0 | 8,068 kg/km | 404 A | 380 A | 0.0991 Ω/km | 0.127 Ω/km | 0.108 Ω/km | 26.5 kA |
XLPE 5.5 mm + inner/outer semi-con 0.6 mm + 25 mm² copper-tape screen · PD ≤ 10 pC at 2 U₀ · GB/T 12706.4-2008 / IEC 60502-2. Bend radius 15 × OD = 1,122 mm. Buried at 0.7 m, soil ρ = 2.5 K·m/W. Methods E / D / B2 per IEC 60364-5-52.
Matriks spek · 9 keluarga
80+ baris · 4 tahap voltan · 8 faktor pembetulan per keluarga.
0.6/1 kV (LV) · 6/10 kV (MV)
YJV22 0.6/1 kV & 6/10 kV steel-tape armoured
XLPE · Galvanized steel-tape (STA) double-layer overlap
19 baris · IEC 60502-1 · IEC 60502-2
IEC 60502-1IEC 60502-2GB/T 12706.1-2008
450/750 V
BV / BVR 450/750 V copper building wire
PVC TI1 · Not applicable
12 baris · IEC 60227-3 · GB/T 5023.3
IEC 60227-3GB/T 5023.3SNI 04-6629.3:2006
450/750 V
BVVB flat 450/750 V building cable
PVC TI1 cores · Not applicable
8 baris · IEC 60227-4 · GB/T 5023.4
IEC 60227-4GB/T 5023.4JB/T 8734.5-2016
300/500 V
RVV 300/500 V flexible cable
PVC TI2 cores · Not applicable
9 baris · IEC 60227-5 · GB/T 5023.5
IEC 60227-5GB/T 5023.5SNI 04-6629.5:2006
450/750 V
WDZA-GYJS(F)/125 °C LSZH safety wire
Double-layer irradiated cross-linked halogen-free low-smoke compound · Not applicable
7 baris · JG/T 441-2014 · IEC 60332-3
JG/T 441-2014IEC 60332-3IEC 61034-2
450/750 V
KVV / KVVR / KVVRP / KVV22 control cable
PVC or XLPE (per family) · Shield (KVVRP) · steel-tape (KVV22) · plain (KVV)
9 baris · GB/T 9330.1-2020 · GB/T 9330.2-2020
GB/T 9330.1-2020GB/T 9330.2-2020IEC 60227-7 signal
Data (PoE+ supported on Cat6 with bundling derating)
Cat5e / Cat6 industrial LAN cable
Polyethylene (PE) per pair · Optional foil/braid shield (F/UTP / SF/UTP)
3 baris · TIA/EIA-568-C.2 · ISO/IEC 11801
TIA/EIA-568-C.2ISO/IEC 11801YD/T 1019-2013
0.6/1 kV
YFD prefabricated branch cable
XLPE · Optional steel-tape; molded-joint factory pre-cast
4 baris · JB/T 10743-2007 · Project drawing schedule required
JB/T 10743-2007Project drawing schedule required
Laporan IEC type-test
CESI · DNV KEMA · TÜV Rheinland.
Makmal + standard + skop per laporan di bawah adalah tetap; nombor laporan, tarikh keluaran, dan PDF yang ditandatangani dikeluarkan apabila dikeluarkan di bawah NDA pada RFQ pertama yang berkelayakan. Pautan portal pengesahan di bawah membuka permukaan carian awam makmal untuk pemeriksaan silang pembeli pada nombor yang dikeluarkan.
Skop MV semasa. Skop bid MV semasa: 6/10 kV — laporan type-test IEC 60502-2 sedia dalam fail, konduktor Class 2 dan Class 5, matriks spek 12-bracket di bawah. Baris YJV22 12/20 kV dirujuk terhadap pembinaan standard IEC 60502-2 dan sedang dalam ujian semula yang diselaraskan untuk pengesahan per-voltage-class; berguna sebagai pratonton kejuruteraan, namun untuk prakelayakan tender 12/20 kV sila berpaut pada skop per-voltage-class yang telah disahkan (garis masa pelepasan di /about).
IEC 60502-1 (2004) + A1 (2009)
Type tests on YJV 0.6/1 kV XLPE-insulated power cable: tensile strength, elongation, thermal aging, hot-set, water absorption, AC voltage 3.5 kV / 5 min, partial discharge, bending + tan δ, heating cycle.
- No. laporan
- Specimen — issued under NDA
- Makmal
- CESI S.p.A. · Milan, Italy
IEC 60502-2 (2014)
Type tests on YJV22 6/10 kV three-core armoured cable: partial discharge ≤ 10 pC at 2 U₀, AC voltage 6.5 kV (U₀) for 5 min, impulse withstand 95 kV peak, screen system continuity, 8-hour heat cycle, water absorption.
- No. laporan
- Specimen — issued under NDA
- Makmal
- CESI S.p.A. · Milan, Italy
IEC 60228 (2004)
Conductor resistance verification — Class 1 solid, Class 2 stranded, Class 5 flexible compliance for sections 1.5 → 240 mm². Resistance measured at 20 °C and corrected to 20 °C ambient.
- No. laporan
- Specimen — issued under NDA
- Makmal
- CESI S.p.A. · Milan, Italy
IEC 60331-1-2 (2018)
Fire-resistance test at 750 °C for 180 minutes with mechanical impact at 5 min intervals. Circuit continuity verified across the full burn cycle on 4×2.5 mm² sample.
- No. laporan
- Specimen — issued under NDA
- Makmal
- DNV KEMA Laboratories · Arnhem, Netherlands
IEC 60332-3-24 (Category C)
Flame propagation test on bunched cables (Category C — bundled 1.5 L/m of non-metallic material): no flame propagation beyond 2.5 m above burner after 20 minutes burner application.
- No. laporan
- Specimen — issued under NDA
- Makmal
- DNV KEMA Laboratories · Arnhem, Netherlands
IEC 61034-2 (2019)
Smoke density on burning cable: minimum 60 % light transmittance under steady-state burn conditions, 3 m cube test chamber, measurement at 0.6 m height.
- No. laporan
- Specimen — issued under NDA
- Makmal
- TÜV Rheinland · Köln, Germany
IEC 60754-1 (2019)
Determination of halogen acid gas (HCl + HBr) content of materials taken from the cable insulation and sheath: result < 5 mg/g (LSZH compound compliance).
- No. laporan
- Specimen — issued under NDA
- Makmal
- TÜV Rheinland · Köln, Germany
IEC 60754-2 (2019)
Determination of degree of acidity (pH) and conductivity of combustion gases from cable materials: pH ≥ 4.3 and conductivity ≤ 10 μS/mm.
- No. laporan
- Specimen — issued under NDA
- Makmal
- TÜV Rheinland · Köln, Germany
IEC 60502-2 (2014)
Type tests on YJV22 12/20 kV three-core armoured cable: partial discharge ≤ 10 pC at 2 U₀, AC voltage 21 kV (U₀) for 5 min, impulse withstand 125 kV peak, screen system continuity, 8-hour heat cycle, water absorption. Pending coordinated re-test against the 6/10 kV specimen entry.
- No. laporan
- Pending issuance — coordinated re-test required for 12/20 kV scope
- Makmal
- CESI S.p.A. (target) · Milan, Italy
Postur kepercayaan
Tuntutan kejuruteraan kekal datasheet-gated.
Tindanan pembinaan
Sarung luar, penebat, konduktor, pelindung atau perisai — lapisan boleh dibaca pembeli.
Pakej pesanan
Gulungan, kotak 305 m, drum, penutup hujung, dan isyarat pengendalian.
Risiko laluan
Larian tertanam, terowong, dulang, kabinet kawalan, riser dikaitkan dengan pemilihan keluarga.
Pintu dokumen
Kata-kata sijil, laporan ujian, penerima bayaran, liputan model kekal disahkan sebelum pesanan.
Halaman seterusnya
Lihat terma komersial, pembahagian saluran, FOB borong, kesediaan Indonesia.